Start with units, not rupees
Your bill amount divided by your average tariff gives monthly consumption in kWh (units). A ₹2,400 bill at ₹8/unit means about 300 units a month. Use a 12-month average — summer AC months can double winter usage.
Divide by what a kW produces
In Maharashtra, a well-oriented 1 kW array generates roughly 110–130 units a month across the year. 300 units ÷ 120 ≈ 2.5 kW. We round up to the nearest half kW, then check the roof.
The roof gets a vote
Allow about 80 sq ft of unshaded area per kW. Water tanks, stair cabins and neighbouring buildings cast shadows that move through the day — a survey maps them. If the roof fits less than the bill suggests, we size to the roof and say so.
Sanctioned load matters
Your utility connection has a sanctioned load; net metering rules usually cap system size against it. Raising sanctioned load is possible but adds steps — we check this before quoting.
Bigger is not always better
Oversizing exports more at lower export tariffs in some states, while subsidy caps at 3 kW. The right size balances consumption, roof, rules and budget — which is exactly what our proposal shows.
A worked example
Take a home using 360 units a month with a 3 kW sanctioned load. At roughly 120 units per kW per month, the bill points to 3 kW. If the only unshaded area fits 2.4 kW, the honest proposal is 2.4 kW with the shortfall explained — not a 3 kW system squeezed onto a shaded roof. The calculator will show both the bill-based size and what the roof can carry.
What moves the number up or down
Air conditioning, water heating, a home office and an electric vehicle all raise daytime consumption. A family that is out all day still benefits from net metering, but the value of each exported unit depends on your distributor's rules. Future loads — a second AC, a workshop — are worth mentioning during the survey so the design leaves room.
Where the estimate stops
Any calculator, ours included, works from averages. It cannot see a water tank's afternoon shadow, a weak roof slab or a wiring constraint. Treat the result as a starting range and the site survey as the point where numbers become a proposal.
Want this applied to your roof?
Run the calculator or send your bill — we'll come back with honest numbers.



